CB22
APPLICATION
The CB22 surface-mount cable seal is designed for installation in data center raised floor tiles where the in-floor style, CB11, is not practical due to irregular shaped cutouts (sides of unequal length or corners that are not square) or odd sizes. The CB22 series can be installed in access holes ranging from 5 by 5 in. to 10 by 24 in./127 x 127 mm to 254 x 610 mm. For smaller cutout sizes, use CoolBalance Circular Seals CB33-04 and CB33-06. For larger holes, ask your CoolBalance Sales Representative for a CoolBalance solution. The unique design of the CB22 surface-mount cable seal enables field modification to permit seals designed for longer width holes to be used in holes with the same depth but shorter width. Edge protection would have to be supplied separately. For installations with cables in place, one end of the CB22 can be removed and the seal placed around the existing cables.
Construction: Multi-piece black ABS plastic frame, Sealeze high-quality nylon brush with Dyna-Seal technology
Hole Sizes: 5 x 5 in. to 10 x 24 in./127 x 152 mm to 254 x 610 mm
Installation: No. 8 self drilling screws (supplied) or double-sided tape
Model number construction:
CB22-xxyy where xx = depth, and yy = width in whole inches
Standard depths are (inches): 5, 6, 8, 10; (millimeters): 127, 152, 203, 254
| Cut Out | Model Number | |
| inches | millimeters | |
| 6 x 9 | 152 x 229 | CB22-0609 |
| 8 x 10 | 203 x 254 | CB22-0810 |
| 10 x 12 | 254 x 305 | CB22-1012 |
For cutouts against a wall or other obstruction – utilize a CB22H which consists of two corners, three sides and one brush.
| Cut Out | Model Number | |
| inches | millimeters | |
| 3 x 9 | 76 x 229 | CB22H-0309 |
| 4 x 10 | 102 x 254 | CB22H-0410 |
| 5 x 12 | 127 x 305 | CB22H-0512 |
INSTALLATION
Select the model that fits completely over the cutout hole (CB22-0309 for a 3 x 9 in./76 x 229 mm hole). Place the CoolBalance seal over the cutout hole and affix with the provided screws or double-sided tape (not provided).
For cutouts with shorter than standard width but with a standard depth:
Select the Model No. with a longer width closest to the cutout width. The side channels and brushes can be cut to length using a hand hack saw (side channels, only) and a bolt cutter for the brush. The brush and side pieces are easily assembled and the end pieces connected to the side channels.
TILE CUTOUT SPECIFICATIONS
The CB22 Surface–Mount Cable Seal can be installed over holes of irregular sizes. Simply make sure the seal in its final configuration is of sufficient size to permit taping or mounting with the provided screws (the side channels and corner pieces must rest completely on the floor).
About Sealeze, A Unit of Jason Incorporated
For more than 30 years, engineers, contractors and installers have looked to Sealeze to design and manufacture brush sealing solutions for a wide variety of industrial and air sealing applications. Sealeze manufactures strip brush in the broadest range of sizes, with the largest number of filament types, and provides the widest range of holders to meet the needs of almost any application. Sealeze has been providing brush sealing solutions in data centers, from floor cable seals to technical furniture and cabinets, since the mid 1990s.
